Cheap price Uranus 2507Cu duplex stainless steel plate, 2507cu stainless steel seamless pipe supplier

Short Description:

Superduplex stainless steels have a very high resistance to localized corrosion in chloride media, combined with a high mechanical strength. The series consists of three grades: UR 2507 (EN 1.4410), UR 2507Cu (EN 1.4507) with addition of copper for enhanced resistance in sulfuric acid media, and UR 2507W (1.4501), with tungsten additions for enhanced localized corrosion resistance. The corrosion resistance of these grades is better than UR 904 and comparable to 6Mo austenitics.
All these steels have a pitting resistance equivalent number, PREN, above 40, and a minimum guaranteed yield strength of 550 MPa, allowing for leaner design in load bearing applications.
The alloy composition, including molybdenum and nitrogen additions, has been optimized to obtain a 50/50 austeno-ferritic microstructure with outstanding corrosion resistance even for heavy plates.
The URANUS 2507 series of duplex grades provide cost-efficient alternatives for a wide range of applications, including offshore, phosphoric and sulfuric acid production as well as flue gas cleaning.

Send email to us

Product Detail

Product Tags

Applications

▪ Pharmaceutical Equipment
▪ Chemical Equipment
▪ Sea Water Equipment
▪ Heat Exchangers
▪ Condensers
▪ Pulp and Paper Industry
▪ Off-Shore Oil Drilling Companies
▪ Power Generation
▪ Petrochemicals
▪ Gas Processing
▪ Specialty Chemicals
▪ Pharmaceuticals

Chemical Composition

C	Si	Mn	P	S	Cr	Ni	Mo	N	Cu
≤0.04	≤1.0	≤1.5	≤0.04	≤0.03	24-27	4.5-6.5	2.9-3.9	0.1-0.25	1.5-2.5

Available Sizes And Specifications

2507Cu stainless steel plate sizes and specifications
Grade	2507Cu
Cold rolled stainless steel plate	Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm, Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel sheet	Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305
Stainless steel plate	Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mm Length: as requirements, Surface: No.1/pickling

2507Cu stainless steel strip sizes and specifications
Grade	2507Cu
Cold rolled stainless steel strip	Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel strip	Thickness: 3.0mm - 16mm, Width: 10mm - 900mm Surface: No.1/pickling
Stainless steel foil	Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305

2507Cu stainless steel coil sizes and specifications
Grade	2507Cu
Cold rolled stainless steel coil	Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm, Surface: 2B/BA/SB/8K/HL/1D/2D etc
Hot rolled stainless steel coil	Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mm Surface: No.1/pickling
Standard	ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305

2507Cu stainless steel pipe sizes and specifications
Grade	2507Cu
Stainless steel seamless pipe	Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm, Length: 24000mm
Stainless steel welded pipe	Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm, Length: 18000mm
Stainless steel capillary pipe	Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm, Length: 18000mm
Stainless steel welded sanitary pipe	Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm
Stainless steel seamless sanitary pipe	Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm
Stainless steel square pipe	Side Length: 44 - 300300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel rectangular pipe	Side Length: 46 - 200400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm
Stainless steel coil pipe	Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm
Standard	American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668 Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85· European Standard: EN10216-5, EN10216-2 Japanese Standard: JIS G3463-2006, JISG3459-2012 Russian Standard: GOST 9941-81

2507Cu stainless steel profile sizes and specifications
Grade	2507Cu
Specification	EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO
Standard	ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 .
Stainless steel round Bar	Diameter: 2mm - 600mm
Stainless steel bright Bar	Diameter: 2mm - 600mm
Stainless steel hex Bar	Dimension: 6mm - 80mm
Stainless steel square bar	Dimension: 3.0 - 180mm
Stainless steel flat bar	Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm
Stainless steel angle bar	as requirements
Length	Normally 6m, or produce as requirements
Surface	Black, Bright. Peeled and Polished, Solution annealed.
Delivery condition	cold drawn, hot rolled, forged, grinding, centerless grinding
Tolerance	H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements